GET CLEAR BRAKE FLUID RECOMMENDATIONS FROM THE TRUSTED TEAM AT METRIC MOTORS
The glycol-based DOT 3, DOT 4, and DOT 5.1 brake fluids used in most passenger vehicles absorb moisture over time, which lowers the fluid’s boiling point and can contribute to corrosion inside the hydraulic brake system. That’s why Loveland drivers rely on Metric Motors for brake fluid flush service done right the first time.
We flush and replace brake fluid on domestic, Asian, and European vehicles, matching fluid type and service interval to what your vehicle actually calls for.
Our brake fluid flush can include:
If you’re searching for a trusted auto repair shop near Berthoud, CO, Metric Motors in Loveland is here to help. Located just 7 miles north of Berthoud, we’ve been serving Northern Colorado drivers for more than 50 years with reliable, honest service.
Brake-fluid problems can contribute to noticeable symptoms, but these signs are not specific and should be diagnosed because they may also result from leaks, air in the system, worn brake components, or ABS faults.
Watch for:
A review of the vehicle’s maintenance schedule, along with appropriate fluid inspection and testing, helps determine whether a flush is due now or can wait.
Brake-fluid service requirements vary by manufacturer and vehicle, so the owner’s manual or model-specific maintenance schedule should determine whether replacement is based on time, mileage, fluid condition, or a combination of these factors. Frequent steep-grade driving or heavy towing can expose brake fluid to higher operating temperatures, but the vehicle manufacturer’s maintenance schedule and appropriate fluid testing should determine whether earlier replacement is necessary.
Colorado’s temperature swings add another factor. In freezing conditions, using brake fluid with the correct low-temperature viscosity is important for proper ABS and stability-control operation, while moisture contamination is primarily a concern because it lowers the fluid’s boiling point and can promote corrosion.
Schedule a brake fluid flush if:
We start by checking the condition of your current fluid, since color and clarity tell us a lot before we touch anything. Dark or cloudy fluid can indicate contamination, but appearance alone does not confirm that a flush is due, so the decision should also consider the manufacturer’s schedule and test results such as moisture content or boiling point.
From there, we exchange the fluid at all four wheels, bleed the system to remove air, and pressure test to confirm a firm pedal. We finish with a check of the lines and calipers, since a flush is a good time to catch a small leak before it becomes a bigger repair.
You get fresh fluid and a brake system that has been checked for leaks and proper operation, not simply topped off.
We’ve serviced brakes in Loveland since 1976, and that includes the fluid side of the system, not just pads and rotors. Fresh brake pads do not correct contaminated brake fluid, so we evaluate the hydraulic fluid separately as part of brake service.
What you get:
If pads or rotors are also due, have your pads checked at the same visit.
For a full picture of where your brakes stand, check your brake system with our inspection service.
If your brake pedal feels soft, have the entire brake system inspected promptly, and replace the brake fluid when the manufacturer’s schedule or test results show that service is due.
Call 970-667-2044 to schedule a brake fluid flush in Loveland, CO today. Metric Motors is located at 821 S Lincoln Ave in Loveland, CO. We’re proud to be BBB accredited, and new customers can check our current special-offers page for available discounts and applicable terms.
